LDP
7450 ESS MPLS Guide Page 739
p2mp source ip-address — Displays LDP active P2MP source bindings.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
p2mp-id identifier — Displays LDP active P2MP identifier bindings.
Values 0 — 4294967295
group mcast-address — Displays the P2MP group multicast address bindings.
root ip-address — Displays root IP address information.
rd rd —
Values ip-addr:comm-val| 2byte-asnumber:ext-comm-val| 4byte-asnumber:comm-val
prefixes
Syntax prefixes [family] [summary|detail] [egress-if port-id]
prefixes [family] [summary|detail] [egress-lsp tunnel-id]
prefixes [egress-nh ip-address] [family] [summary|detail]
prefixes prefix ip-prefix/ip-prefix-length [summary|detail] [egress-if port-id]
prefixes prefix ip-prefix/ip-prefix-length [summary|detail] [egress-lsp tunnel-id]
prefixes prefix ip-prefix/ip-prefix-length [egress-nh ip-address] [summary|detail]
Context show>router>ldp>bindings
Description This command display LDP Prefix fec bindings.
Parameters prefix ip-prefix/ip-prefix-length — Specify information for the specified IP prefix and mask length.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
detail — Displays detailed information.
summary — Displays information in a summarized format.
family — Displays either IPv4 or IPv6 active LDP information.
egress-lsp
tunnel-id — Specifies the tunnel identifier for this egress LSP.
Values 0 — 4294967295
egress-nh ip-address — Displays LDP active bindings by matching egress-nh.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
To Next Page