Alcatel-Lucent 7450 - Page 804

Show Commands
Page 804 7450 ESS MPLS Guide
static-route
Syntax static-route ldp-sync-status
Context tools>dump>router
Description This command dumps the sync status of LDP interfaces that static-route tracks.
Parameters ldp-sync-status — Displays the sync status of LDP interfaces that static-route tracks.
Sample Output
*A:Dut-A# tools dump router static-route ldp-sync-status
===============================================================================
Sync Status of LDP interfaces
===============================================================================
If If Name Timer Running? Timeout Time
Index Yes/No used Left
-------------------------------------------------------------------------------
3 ip-10.10.1.1 No 0 0
4 ip-10.10.2.1 No 0 0
===============================================================================
*A:Dut-A#
ldp-sync-exit
Syntax ldp-sync-exit
Context tools>perform>router>isis
Description This command terminates LDP synchronization and restores actual cost of an ISIS interface.
run-manual-spf
Syntax run-manual-spf
Context tools>perform>router>isis
Description This command runs the Shortest Path First (SPF) algorithm.