LDP
7450 ESS MPLS Guide Page 805
ldp-sync-exit
Syntax ldp-sync-exit
Context tools>perform>router>ospf
tools>perform>router>ospf3
Description This command terminates LDP synchronization and restore actual cost of an OSPF interface.
refresh-lsas
Syntax refresh-lsas [lsa-type] [area-id]
Context tools>perform>router>ospf
tools>perform>router>ospf3
Description This command refreshes LSAs for OSPF.
run-manual-spf
Syntax run-manual-spf [externals-only]
Context tools>perform>router>ospf
tools>perform>router>ospf3
Description This command runs the Shorted Path First (SPF) algorithm.
Parameters externals-only — Runs external only SPF.
To Next Page
Loading...
