Copyright @ALE 2020 All Rights Reserved
Your phone supports multiple SIP accounts. Your administrator can declare up to 8 SIP accounts. A
default account is used for calls unless you select the relevant account prior the call. When you
have programmed
It is recommended to program a key for each SIP account in the main page, as a line key. Then the
status of the account is displayed on the homepage. The key of the SIP account receiving an
incoming call is blinking.
If the homepage displays an SIP account (line key), select the SIP account to use in order to
make the call.
The default SIP account is marked by a green point.
Forward is activated for this account.
Do not Disturb is activated for this account.
The call log lists all incoming and outgoing calls for all SIP accounts. The concerned SIP account is
displayed by opening the details of the call log entry.
4.2.1 Program a line key for a SIP account
Long press on a programmable key.
Define the type of programmable key:
Account
Select the relevant account.
Add a label.
Save the programmable key.
4.2.2 Define the default SIP account
The phone is in idle state.
Press the Menu soft key to access the Main Menu.
Use up-down and 'ok' navigation keys to select:
Features.
To Next Page
Loading...
Need help?
General
