EasyManuals Logo

Alcatel-Lucent Myriad Series User Manual

Alcatel-Lucent Myriad Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Copyright @ALE 2020 All Rights Reserved
54
The connection will be established every time the system reboots until you disable the VPN
manually.
To disable the VPN:
Open the Web Management device.
In the settings tab, select the VPN menu (OpenVPN).
Disable the VPN.
Enable VPN.
Apply.
The desk phone restarts.
5.3 Connect your phone to the Wi-Fi
It is possible to connect your DeskPhone to the wireless network of your company or at your
home, in case of remote worker (VPN). You have to plug a Wi-Fi dongle into the USB-A connector
of your phone: To know the supported dongle, please refer to the Alcatel-Lucent Enterprise
website or contact your administrator. The dongle can use 2.4Ghz and 5Ghz bands, but we
recommend using a 5Ghz Wi-Fi network to ensure the best audio quality. The best radio signal will
be automatically selected. A specific icon is displayed in the status bar when you are connected to
a Wi-Fi access point: .
5.3.1 Configure the wireless network
You can manually configure your DeskPhone to connect to the selected Wi-Fi access point (SSID).
This section is useful when you connect your phone to your personal Wi-Fi network for
teleworking or to check the Wi-Fi configuration of the phone. Before configuring your phone, you
need to know the name and the network security key (passphrases) of the Wi-Fi access point.
Plug the Wi-Fi dongle into the USB-A connector of the DeskPhone.
Start your desk phone (powered by PoE or adapter).
The phone is in idle state.
Menu
Press the Menu soft key to access the Main Menu.
Advanced Setting
Use up-down and 'ok' navigation keys to select:
Advanced Setting
.
The administrator password of the phone is requested.
Enter the administrator password.
Validate.
Wi-Fi
All scanned SSIDs are listed according to signal strength (it may take a few seconds to display
the available networks).
Use the up-down navigation key to scroll the page.
: this icon, displayed at left of the SSID name, represents the signal strength: the more
waves, the better the signal. During connection establishment, this icon is displayed at right of
the SSID name.
: this icon indicates the current connected SSIDs.
: this icon indicates SSIDs already saved in the phone.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent Myriad Series and is the answer not in the manual?

Alcatel-Lucent Myriad Series Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelMyriad Series
CategoryTelephone
LanguageEnglish

Related product manuals