Copyright @ALE 2020 All Rights Reserved
*To know the supported dongle, please refer to the Alcatel-Lucent Enterprise website or contact
your administrator.
8.2.1 install the add-on to the desk phone
1- Insert the add-on USB-A connector into the USB-A socket of the desk phone.
2- Use the add-on support to fix it to the desk phone using the provided screw.
3- The add-on is powered by the desk phone if the desk phone is connected to an external
power adapter.
If your desk phone is powered via PoE, we recommend connecting the EM200 to an USB-C
power adapter (DC 5V/2A output, not provided with the add-on).
4- Restart the desk phone (unplug and plug in the power jack if you are using an external
power adapter or the Ethernet connector – LAN).
8.2.2 Install more than one add-on module
It is possible to connect up to three similar add-on modules. It is not possible to connect EM20 and
EM200 add-ons together.
Depending on how the desk phone is powered, you need to use an external power adapter (DC
5V/2A output, not provided with the add-on) connected to the add-on.
Your desk phone is powered via PoE:
You can connect up to one EM20 without an external power adapter.
You can connect three EM20s. One of the add-ons must be connected to an external power
adapter.
You can not connect one EMS200
You can connect up to two EM200s. One of the add-ons must be connected to an external power
adapter.Your deskphone is powered via an external power adapter:
You can connect up to three EM20s without an external power adapter.
You can connect up to two EM200s without an external power adapter.
You can connect three EM200s. One of the add-ons must be connected to an external
power adapter.
To attach another add-on, affix and connect the new add-on to the one that is already connected:
The first add-on is connected to the desk phone.
Insert the new add-on USB-A connector into the USB socket of the installed add-on.
Use the add-on support to fix it to the add-on using the screw provided.
To Next Page
Loading...
Need help?
General
