Copyright @ALE 2020 All Rights Reserved
Select the group to delete.
Access to all defined group(s).
4.7.10 Delete all group in the local directory
Select this softkey to open your directory(-ies).
Select the group to delete.
4.7.11 Import contacts from your mobile phone via Bluetooth® (M7)
To import a contact from your mobile phone you have to pair it to your desk phone.
Before performing the pairing operation, the device must be in detectable mode. Consult the user
documentation of your Bluetooth® device.
The phone is in idle state.
Press the Menu soft key to access the Main Menu.
Use up-down and 'ok' navigation keys to select:
Basic Setting
.
Use up-down and 'ok' navigation keys to select:
Bluetooth
.
Press the softkey under the following label:
Scan
.
Scanning starts.
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to
be displayed.
Add the device by pressing on the associated key:
Connect
.
Enter the PIN code of the device if necessary.
This icon is displayed on your desk phone: .
Depending on your mobile phone, you have to accept to share contacts either during pairing or in
connection options. Consult the user manual of your mobile phone.
The contacts are automatically imported into the directory:
External Directory
.
Contacts are kept until another mobile is connected to the M7 or if you delete all imported
contacts manually.
If necessary, you can manually synchronize contacts:
The phone is in idle state.
Press the Menu soft key to access the Main Menu.
Use up-down and 'ok' navigation keys to select:
Directory
.
Use up-down and 'ok' navigation keys to select:
Bluetooth
.
Use up-down and 'ok' navigation keys to select:
Paired Bluetooth Device
.
To Next Page
Loading...
Need help?
General
