Copyright @ALE 2020 All Rights Reserved
Select the contact to call in the list of last number dialed.
Use one of the following:
Press the 'take the call' key. Make the call with the active device: handset if unhooked,
headset if connected, otherwise in hands-free mode.
Press the OK key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
Press the call key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
If defined in the phone settings, you can use these keys to initiate the call (
Menu
Features
Key As Send
).
Depending on the system, after dialing the number, the call can be started automatically after a
delay without action.
When you are in hands-free mode, you can take the call at any time on the handset by unhooking
it.
Click the icon in the screen to switch the audio from hand free to headset or from the
handset to headset.
To make an external call, dial the outside line access code before dialing your contact number.
The call will start after a timeout of approx. 10 seconds if there is no action taken after dialling.
If you are using multiple SIP accounts on your phone, you can choose which account to use to
make the call.
4.3.3 Calling by name
You can call a contact by his/her name using the search feature in the company directory.
This feature depends on the system configuration. If necessary, contact your administrator.
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
Use the alpha-numeric keyboard key to switch between the numeric and alphabetic keyboard.
Switch to the alphabetical keyboard.
Enter the first letters of your contact's name.
The search runs as soon as you enter a character (predictive search). The matching
names are displayed.
Use UP/Down key to select the contact you want to call.
Use one of the following: