Copyright @ALE 2020 All Rights Reserved
Press the 'take the call' key. Make the call with the active device: handset if unhooked,
headset if connected, otherwise in hands-free mode.
Press the OK key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
Press the call key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
If defined in the phone settings, you can use these keys to initiate the call (
Menu
Features
Key As Send
).
4.3.4 Call from call log
You can call back a contact from the call log.
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
In idle state or from the dialer:
Select this softkey to open call logs from the homepage or the dialer.
Use UP/Down key to select the contact you want to call.
Use one of the following:
Press the 'take the call' key. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
Press the OK key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
Press the call key to start the call. Make the call with the active device: handset if
unhooked, headset if connected, otherwise in hands-free mode.
If defined in the phone settings, you can use these keys to initiate the call (
Menu
Features
Key As Send
).
If you are using multiple SIP accounts on your phone, the call back is made with the SIP account
displayed in the call log.
4.3.5 Calling using your personal directory
You can unhook the handset or the headset to make a call with the handset or the headset
otherwise you make a call in hands-free mode.
In idle state or from the dialer:
Select this softkey to open your local directory from the homepage or the dialer.
Open a directory (depending on model).
Select the contact to call.
Use one of the following: