To Next Page

To Previous Page

8.3.2 Icons displayed on the screen

The icons are normally displayed for a couple of seconds on connection. The same symbol is

displayed in red when the connection is broken.

USB device connected.

Incoming call or call in progress via

Bluetooth®.

Incoming call or call in progress via USB.

Music mode via Bluetooth®.

Music mode via USB.

Headset connected.

Visible for pairing via Bluetooth®.

Volume adjustment (number of bars indicates

the volume selected).

Reconnecting to Bluetooth® device.

Microphone switched off (mute).

Bluetooth® device connected.

Battery status.

8.3.3 Turning off and on

The EGO starts automatically when it is connected with the provided USB cable to the desk phone

or powered-up computer.

 Push the button to start the device manually.

 Hold down the button for five seconds to manually switch off.

8.3.4 Connect the device to the desk phone using the USB cable

 Connect the device to the USB type A connector of the desk phone using the provided USB

cable. The EGO automatically starts. The following icon is displayed on the screen of the

device: .

 The EGO is detected as a hands-free device. Select Ego' on the pop-up displayed on your

desk phone.

 The device is ready for use.

8.3.5 Connect the device to the desk phone using Bluetooth® (compatible Bluetooth® desk phone)

 Switch on the EGO.

 Put the device in detectable mode: hold the Bluetooth® button down for two seconds on

the EGO: . The following icon is displayed on the screen of the device: .

 From your desk phone, pairing the EGO:

The phone is in idle state.

Press the Menu soft key to access the Main Menu.

Basic Setting

Use up-down and 'ok' navigation keys to select:

Basic Setting

Alcatel-Lucent Myriad Series User Manual

Questions and Answers: