Allen-Bradley PowerFlex 40 User Manual

100 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 10 Create a Project Using RSLogix 5000 Programming Software
Follow These Steps
Complete these steps.
Create a Project
Configure the
Controller
Add Local I/O
Modules
Add Ladder Logic to
Test the Local 1769
Compact I/O Modules
Set the
Communication Path
and Download to
the Controller
Add the 1769-SDN
to the Project
page 101
page 103
page 105
page 106
page 109
page 111
Optional
Complete if you have
distributed I/O on the DeviceNet
network.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)