Allen-Bradley PowerFlex 40 User Manual

150 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 12 Create a PowerFlex 70 Application
Create a DeviceNet Scanlist
DeviceNet only
1. Move the controller keyswitch to
PROG and go offline.
2. In RSLogix controller organizer,
right-click the 1769-SDN and select
Properties.
3. On the RSNetWorx tab, click
the RSNetWorx icon.
4. In RSNetWorx for
DeviceNet, click Who Active to go
online.
5. Click OK.
If the drive does not display or
displays with an error regarding the
EDS file, see Knowledgebase article
20539.
6. Right-click the PowerFlex 70 drive and
select Download to Device.
7. Click Yes.
The configuration is downloaded to
the PowerFlex 70 drive.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)