Allen-Bradley PowerFlex 40 User Manual

124 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
Create a DeviceNet Scanlist
Go Online. DeviceNet only
(for EtherNet/IP and ControlNet, skip to page 127
)
1. Select Network > Upload from
Network.
2. Click Yes.
3. Right-click the 1734-ADN adapter
and select Properties.
4. Click the Parameters tab and write
down the parameters shown.
5. Click OK.
6. Right-click the 1769-SDN module
and select Properties.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)