Allen-Bradley PowerFlex 40 User Manual

120 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
Configure the DeviceNet Subnet
DeviceNet only
1. In RSNetWorx for DeviceNet,
from the File menu, select New.
2. Select the DeviceNet
Configuration file type.
3. Click OK.
4. Click Who Active to go online.
5. Expand the AB_DF1-1, DF1
network and select the DeviceNet
Subnet, DeviceNet network.
6. Click OK.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)