Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 75
Prepare the PanelView Plus Terminal Chapter 6
Make Network Connections
Required for all controllers
1769-L32C or 1769-L35CR controllers
Connect an Ethernet cable.
Connect the other end of the cable to an
Ethernet switch.
Connect a ControlNet cable to port A.
Connect the tap to the ControlNet network.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)