Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 145
Create a PowerFlex 70 Application Chapter 12
Add the Drive to Your RSLogix 5000 Project and Connect to the Drive
Ethernet/IP and ControlNet only
(for a DeviceNet, skip to
page 150)
1. Move the controller
keyswitch to PROG and go
offline.
2. In the RSLogix 5000
programming software,
right-click the controller
network port and select
New Module.
3. Expand Drives.
4. Select the PowerFlex
70-x and click OK.
EtherNet/IP
ControlNet
EtherNet/IP
ControlNet

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)