Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 169
Create a PowerFlex 40 Application Chapter 13
Add the Drive to Your RSLogix 5000 Project
EtherNet/IP and ControlNet networks only
(for a DeviceNet network, skip to
page 171)
1. Right-click your network
port and select New
Module.
2. Expand Drives.
3. Select the PowerFlex 40-x.
EtherNet/IP
ControlNet
EtherNet/IP
ControlNet

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)