Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 171
Create a PowerFlex 40 Application Chapter 13
Create a DeviceNet Scanlist
DeviceNet only
2. In the RSLogix 5000 programming
software, right-click the 1769-SDN
and select Properties.
3. If RSNetWorx for DeviceNet is open,
skip to step 4
.
If RSNetWorx for DeviceNet is
not open:
a. In RSLogix 5000
programming, right-click the
1769-SDN and select
Properties.
b. On the RSNetWorx tab, click the
RSNetWorx button.
4. Click Who Active to go online.
5. Click OK.
6. Right-click the PowerFlex 40 and select
Download to Device.
1. Move the controller keyswitch to PROG.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)