Allen-Bradley PowerFlex 40 User Manual

94 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 9 Configure the DeviceNet Network
Set the 1769-SDN Module’s Node Address
1. Launch RSNetWorx for DeviceNet software.
2. From the Tools menu, choose Node
Commissioning.
3. Click Browse.
4. Under AB_DF1-1, expand
the CompactLogix Backplane
and the 1769 Bus.
5. Expand the 1769-SDN and
the DeviceNet Port, and select
the 1769-SDN.
6. Click OK.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)