Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 25
Prepare the CompactLogix Hardware Chapter 1
Wire Power
1769-PA2 power supply
PWR OUT +24V DC
PWR OUT COM
120/240V AC
V AC COM
CHASSIS GROUND
1. Insert the 120/240V AC, V AC COM, and Chassis Ground wires and tighten the
terminal screws.
2. Turn on incoming power.
WARNING
Verify that all incoming power is turned off before wiring power.
Terminal Wiring Diagram

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)