Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 161
Create a PowerFlex 70 Application Chapter 12
Test the PowerFlex 70 Tags
Ethernet/IP and ControlNet only (for DeviceNet, skip to page 163)
2. Double-click Controller Tags.
3. Locate and
expand the
PowerFlex 70
output tag.
4. Change the ClearFault tag to 1 to
clear any initial faults.
5. Change the ClearFault tag back to
0.
1. Move the controller keyswitch to RUN.
TIP
To change a tag in RSLogix:
1. Select the tag value.
2. Enter or select the desired value.
3. Press Enter.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)