Allen-Bradley PowerFlex 40 User Manual

55Publication IASIMP-QS001C-EN-P - October 2009 55
Chapter 4
Prepare the PowerFlex 70 Drive
In this chapter, you mount and wire power to a PowerFlex 70 drive. You also configure your
communication adapter and make network connections.
Before You Begin
Determine which network and appropriate adapter to use on the PowerFlex 70 drive:
• For an EtherNet/IP network (option 1), use the 20-COMM-E module.
• For a ControlNet network (option 2), use the 20-COMM-C module.
• For a DeviceNet network (option 3), use the 20-COMM-D module.
What You Need
• PowerFlex 70 drive
• Communication adapter for use with the PowerFlex 70 drive: 20-COMM-E
(EtherNet/IP adapter), 20-COMM-C (ControlNet adapter), or 20-COMM-D
(DeviceNet adapter)

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)