Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 205
Create a PanelView Plus Application Chapter 14
Test the Indicator and Push Button
All controllers
5. Click the Play button.
1. Verify that the keyswitch on your
controller is moved to Run.
2. Right-click an unused area of the
display and select Display
Settings.
3. Change the Maximum Tag
Update Rate to 0.05.
4. Click OK and then click OK
again.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)