63Publication IASIMP-QS001C-EN-P - October 2009 63
Chapter
5
Prepare the PowerFlex 40 Drive
In this chapter, you mount and wire power to a PowerFlex 40 drive. You also configure your
communication adapter and make network connections.
Before You Begin
Determine which of these networks and appropriate adapter to use:
• For an EtherNet/IP network (option 1), use the 22-COMM-E.
• For a ControlNet network (option 2), use the 22-COMM-C.
• For a DeviceNet network (option 3), use the 22-COMM-D.
What You Need
• PowerFlex 40 drive
• Communication adapter for use with the PowerFlex 40 drive: 22-COMM-E
(EtherNet/IP adapter), 22-COMM-C (ControlNet adapter) or 22-COMM-D
(DeviceNet adapter)
• Communication adapter cover for use with the PowerFlex 40
To Next Page
Loading...
