Allen-Bradley PowerFlex 40 User Manual

174 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 13 Create a PowerFlex 40 Application
Create DeviceNet Tags
DeviceNet only
(to complete this step for EtherNet/IP or ControlNet, see page 169
)
1. In RSLogix 5000 programming software, from the
Tools menu, choose DeviceNet Tag Generator.
2. Select the RSLogix 5000 project.
3. Click Select
Scanner.
4. Select the 1769-SDN scanner that
scans the network where the drive is
located.
5. Click Select RSNetWorx Project.
6. Select DeviceNet configuration file recorded on
the Network Worksheet
.
7. Click Select Scanner Node.
IMPORTANT
Before running the DeviceNet Tag Generator, verify that
RSNetWorx for DeviceNet software is closed.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)