Allen-Bradley PowerFlex 40 User Manual

72 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 6 Prepare the PanelView Plus Terminal
Follow These Steps
If you have a PanelView Plus terminal, complete these steps for your network.
EtherNet/IP ControlNet Serial
Install the
ControlNet
Interface Module
page 73
Mount the
PanelView Plus
page 73
Wire the
PanelView Plus
Terminal to the
page 74
Make Network
Connections
page 75
Mount the
PanelView Plus
page 73
Wire the
PanelView Plus
Terminal to the
page 74
Make Network
Connections
page 75
1769-L31
controller
page 76
Mount the
PanelView Plus
page 73
Wire the
PanelView Plus
Terminal to the
page 74
Make Network
Connections
page 75

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)