Allen-Bradley PowerFlex 40 User Manual

122 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
11. Click the Device Bridging tab.
12. Click Associate File.
13. Select the main DeviceNet configuration file
you recorded on the Network Worksheet
.
14. Click Open.
15. Click OK.
16. Save the DeviceNet subnet configuration
file.
Name the file so it can be easily
identified as the subnet. This quick
start uses the name SubnetDNet.dnt.
17. Record the file name on the
Network Worksheet
located inside
the back cover of this quick start.
18. In RSNetWorx software, from the
File menu, choose Open.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)