Allen-Bradley PowerFlex 40 User Manual

126 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
15. Verify that Automap on Add is checked
and click Apply.
16. Click Yes.
Click OK.
17. Save the configuration file.
You will use this file to Create DeviceNet
Tags and Add Ladder Logic later in this
chapter.
18. Close RSNetworx for DeviceNet software.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)