Allen-Bradley PowerFlex 40 User Manual

202 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 14 Create a PanelView Plus Application
12. On the Connections tab, click ...
under Tag.
13. Right click your project and
select Refresh All Folders.
14. Expand the controller shortcut
and select Online > Program:
Main Program.
15. Select ‘xxxx_Light’ (the
name of your light in ladder
logic) and click OK.
The Indicator tag is
populated.
16. Click OK.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)