Allen-Bradley PowerFlex 40 User Manual

28 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 2 Prepare the Computer
Complete these steps.
Terminology
Install RSLogix
Programming
Software
Configure a Serial
Driver
Configure the
EtherNet/IP
Driver in RSLinx
Install Additional
Software
Load Firmware
Optional
(Depending on your system.)
page 29
page 38
page 44
page 40
page 42
page 36
page 31
Set the IP
Address for
the Computer

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)