Allen-Bradley PowerFlex 40 User Manual

30 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 2 Prepare the Computer
ControlNet connection - 1769-L32C and 1769-L35CR controllers only
Serial connection - Required for all controllers
Connect a ControlNet tap to port A of the
ControlNet communication card in the
computer.
ControlNet Tap on
ControlNet Network
Computer with 1784-PCIC or
1784-PCICS communication
card.
You connected a 1756-CP3 cable to a COM port on the computer and to the CH0 port
on the controller in Chapter 1.
1756-CP3 serial cable to CH0 on 1769-L31.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)