Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 43
Prepare the Computer Chapter 2
6. Move the keyswitch
on the controller to
PROG.
7. If the Current Revision matches the
revision of firmware you want, click
Cancel and skip to Chapter 3.
Otherwise, select the desired firmware
revision and click Next.
8. Click Finish to start the firmware
update.
4. Expand the AB_DF1-DFI driver,
and select your controller.
5. Click OK.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)