Allen-Bradley PowerFlex 40 User Manual

Publication IASIMP-QS001C-EN-P - October 2009 97
Configure the DeviceNet Network Chapter 9
8. Click OK.
RSNetWorx software begins browsing the
network.
If your PowerFlex drive does not display, see
Uploading an EDS File From a Drive,
Knowledgebase ID 20539.
TIP
Once all of the devices on your
DeviceNet network appear, you
can click Cancel.
9. Right-click the 1769-SDN module and
choose Properties.
10. Click the Module tab.
11. Click Download.
This clears all configuration from
the 1769-SDN module, synching
the software with the device.

Allen-Bradley PowerFlex 40 Specifications

General

Output Voltage	0 to Input Voltage
Enclosure	IP20
Control Method	V/Hz, Sensorless Vector Control
Communication	RS485
Frequency	0 to 400 Hz
Protection	Overload, Overvoltage, Undervoltage, Short Circuit
Operating Temperature	-10 to 50°C (14 to 122°F)
Storage Temperature	-40...70 °C (-40...158 °F)
Humidity	5% to 95% non-condensing
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC (depending on model)