-V BAG0087.11 01.20
8.6 Setting the working width
• There are different spreading disc pairs for the various working
widths.
• The working widths are adjustable within the working ranges of
the respective spreading disc pairs (however, there may be de-
viations for the spreading of urea).
• The type of fertiliser and desired working width determine the
setting of the pivotable spreading vanes.
The specific spreading properties of a fertiliser influence its
throwing range. The pivotable spreading vanes allow the ad-
justment of these specific spreading properties of a fertiliser, so
that the respective fertiliser can be spread over the desired
working width.
The primary factors that affect the spreading properties are:
• Granule size
• Bulk density
• Surface condition
• Humidity
We therefore recommend the use of a well granulated fertiliser by a
renowned manufacturer and also checking of the working width set-
ting using the mobile fertiliser test rig.
Extract from setting chart
3,72 mm
1,03 kg/l
Calibration factor
1,00
ZA- V
Side
sprea-
ding
Boundary spreading Ditch spreading
V-Set 2
18,0
17/46 720 C 60 90 25 5 90 60 9 -220 18 -8
17/46 720 D 60 90 25 5 90 60 10 -220 23 -4
V-Set 3
27,0
14/46 720 E 50 80 25 5 80 60 12 -220 28 -3
15/46 720 F 50 80 25 5 80 60 13 -220 31 0