Cleaning, maintenance and repairs
-V BAG0087.11 01.20
12.3 Maintenance plan – Overview
• Carry out maintenance work when the first interval is reached.
• The times, continuous services or maintenance intervals of any
third party documentation shall have priority.
Once after 50 operating hours
Angular gearbox
(not for ZA-V Tronic)
126
Daily
Component
Specialist workshop
Spreading vanes
Weekly / Every 50 operating hours
Whole implement
• Check for visible defects
Hydraulic system
•
X
Every six months / 200 operational hours
PTO shaft with friction clutch
• Ventilate friction clutch
X
As necessary
Spreading vanes