ZA-V BAG0087.11
8.8.2 Boundary spreading by reducing the spreading disc speed
For boundary spreading with the ZA-V Hydro, the spreading disc
speed on the boundary side is reduced.
Enter the spreading disc speed for boundary spreading on the control
terminal.
↓With smaller working widths, the field-side spreading disc speed
may also need to be reduced.
Enter the boundary-side quantity reduction for boundary spreading
(25%) and ditch spreading (60%).
Excerpt from the setting chart
Fertilis-
½ Working width
450 475 500
500
550
600
600 500 550 550
600
650
650
550
600
600
650
650
675
720
↓550
↓550
400
400
425
450
475 350 400 400
450
550
550
400
450
450
500
550
575
600
↓500
↓500
300
300
325
350
350 325 350 350
400
450
450
350
400
400
450
500
525
550
Boundary-side spreading disc speed
↓ Field-side spreading disc speed
The specified rpm are guide values only. The optimal speed can de-
viate from these recommendations depending on the fertiliser proper-
ties and the set spreading vane position. For this reason, we strongly
recommend checking the setting with the mobile test rig.