-V BAG0087.11 01.20
5.6 Boundary, ditch and side spreading
If the fi
rst tramline is half the working width of the
field edge, you can carry out boundary spreading
via remote control using the Limiter.
For this, the limiter can be lowered into the
spreading area and thereby influence the spread
pattern.
For the adjustment, the limiter can be turned
around the spreading disc axis and lowered to
different positions.
16
As an option, the spread deflector can be
equipped with a position indicator:
1 – Spread deflector in use
0 – Spread deflector not in use
17