January 2016 iii
UPLC-II™ System Manual
Preface
Scope
This manual describes the functions and features of the Universal Power-Line Carrier. It is intended pri-
marily for use by engineers and technicians involved in the installation, alignment, operation, and mainte-
nance of the UPLC-II™. (The majority of which also applies to the UPLC™.)
Equipment Identification
The UPLC-II™ equipment is identified by the Catalog Number on the chassis nameplate.
Warranty
Our standard warranty extends for 5 years after shipment. For all repaired modules or advance replace-
ments, the standard warranty is 1 year or the remaining warranty time, whichever is longer. Damage clear-
ly caused by improper application, repair, or handling of the equipment will void the warranty.
Equipment Return & Repair Procedure
To return equipment for repair or replacement:
1. Call your Ametek representative at 1–800–785–7274 (or 954-344-9822).
2. Request an RMA number for proper authorization and credit.
3. Carefully pack the equipment you are returning.
Repair work is done most satisfactorily at the factory. When returning any equipment, pack it in
the original shipping containers if possible. Be sure to use anti-static material
when packing the
equipment. Any damage due to improperly packed items will be charged to the customer, even
when under warranty.
Ametek also makes available interchangeable parts to customers who are equipped to do repair
work. When ordering parts (compo nents, modules, etc.), always give the complete Ametek style
number(s).
4. Make sure you include your return address and the RMA number on the package.
5. Ship the package(s) to:
AMETEK
Power Instruments
4050 NW 121st Avenue
Coral Springs, FL USA 33065
To Next Page
Loading...
Need help?
General