Advanced settings
- 128 -
9. Press STOP to go back to the previous display (SET UP - TELEPHONE
LINE).
10. If you wish to change the PABX (outside line) prefix, continue to step 11. If not, go
straight to step 16.
11. Press 1 so that top line reads SET UP - PREFIX.
12. Press 1 to select PABX.
13. Press 2 so that top line reads SET UP - PABX.
14. Type in the required PABX prefix (for example 9), then press STORE.
& If necessary, press !DEL to delete any existing digits first.
& With PABX selected, all Address Book telephone numbers starting with a
dash will be dialled preceded by the PABX prefix (entered at step 14 above).
15. Press STOP to go back to previous display (SET UP - TELEPHONE LINE).
16. If you wish to change the codes for enabling/disabling Call Waiting, continue to
step 17. If not, go straight to step 23.
17. Press 2 so that top line reads SET UP - CALL WAITING.
18. Press 1 so that top line reads SET UP - WAIT ENABLE.
(If necessary, press !DEL to delete any existing code.)
19. Type in the enable code (for example ✱43#), then press STORE.
20. Press 2 so that top line reads SET UP - WAIT DISABLE.
(If necessary, press !DEL to delete any existing code.)
21. Type in the disable code (for example #43#), then press STORE.
22. Press STOP to go back to previous display (SET UP - TELEPHONE LINE).
23. Press STOP repeatedly to return to standby display.
♦ To change ringtone group settings, see page 147.
To Next Page
Loading...