Why does a VNC Server dialog appear when using G4 WebControl with AMX touch panel?
You must enter the IP Address of the target panel. This can be found within the Setup > Protected Setup >System Settings page.
What to do if I have more than one AMX Modero panel connected and only one shows up?
When using multiple panels, it can be easy to overlook the need to assign different Device Number values to each panel. Press and hold the grey Front Setup Access button for 3 seconds to open the Setup page.
What to do if Manifest.xma cannot be found on AMX NXD-1200V Touch Panel?
If you see this error again, before attempting to send the file, uncheck the Smart Transfer box. It may be necessary to do a Full Clean.
General| Display Size | 12.1 inches |
|---|---|
| Resolution | 1280 x 800 |
| Ethernet | 10/100 Mbps |
| Connectivity | Ethernet |
| Power Supply | PoE (Power over Ethernet) |
| Mounting | Wall, Tabletop |
To Next Page
