Instrument Overview 2-10 Settings Menu
MS2090A UG PN: 10580-00444 Rev. U 2-31
The instrument IP address and its HOSTNAME are set via the System menu (upper left corner) and accessing
the ETHERNET or WIFI settings menu.
TCP/IP connectivity requires setting up the parameters described at the beginning of this section. The
following is a brief overview of how to set up a general LAN connection on the MS2090A.
Note
Wi-Fi does not support connections using HOSTNAME; use IP addressing to establish a wireless
network connection.
Note
You may need to consult your network documentation or network administrator for assistance in
configuring your network setup.
To Next Page
Loading...
