A-5 Warning Notifications Instrument Notifications and Troubleshooting
A-14 PN: 10580-00444 Rev. U MS2090A UG
Failed to save screenshot. Device may be full.
When saving a screenshot fails.
IF Gain Calibration is off
In Toolbar, Logged, Persistent
IF Shape Calibration is off
In Toolbar, Logged, Persistent
Invalid frequency setup for this antenna
In Toolbar, Logged, Transient
Limit recall initiated
When a limit setup file is selected for recall.
Not enough available space to save file: <filename>
When the entire file could not be written.
One or more shortcuts are no longer valid: <shortcut name>. File (s) cannot be found.
In Toolbar, Logged, Persistent
Playback file corrupted, stopping playback
In Toolbar, Logged, Transient
RBW changed: cannot be greater than IF bandwidth
In Toolbar, Logged, Transient
Recall file does not exist
When the file selected for recall could not be accessed
Record CSV file failed to open
In Toolbar, Logged, Transient
Reference Level Calibration is off
In Toolbar, Logged, Persistent
Remote Lockout Warning: Warning Instrument Is Under Remote Control. Press “Return to Local” to exit
remote control and enable on-screen
Popup, Not Logged, Persistent
Restart required for new settings to take effect.
Persistent. When hostname or options (in the Debug menu) are changed.
RF or Reference Level must be below <value> to enable PreAmp
In Toolbar, Logged, Transient
To Next Page
Loading...
