A-6 Error Notifications Instrument Notifications and Troubleshooting
A-18 PN: 10580-00444 Rev. U MS2090A UG
IQ capture file failed to save
In Toolbar, Logged, Transient
IQ Capture Aborted
In Toolbar, Logged, Transient
Model Mismatch. Shortcut Creation failed due to model mismatch. Model from file.
In Toolbar, Logged, Transient
Not enough available space to save file: filepath/filename
When the entire file could not be written
Out of Range
In Toolbar, Not Logged, Transient
Options upgrade failed due to <specific reason>
In Toolbar, Logged, Transient
Options upgraded. Please restart the instrument to use new features.
In Toolbar, Not Logged, Transient
Options <value> are not valid for the currently installed firmware version. The device might not function
properly
In Toolbar, Logged, Persistent
PLL Unlock Error (X)
In Toolbar, Logged, Persistent. X represents either LO1, LO2, SLO or a combination of them.
PLL Unlock Error (X) @ Y Hz
In Toolbar, Logged, Persistent. X represents the PLL that failed and Y represents the specific frequency
value at which the failure occurred. The frequency range of Y is from 30,000.00 Hz to 54,000,000,000 Hz.
Query Error
In Toolbar, Not Logged, Transient
Recall file does not exist
When the file selected for recall could not be accessed.
SPA FPGA Programming Error
In Toolbar, Logged, Persistent
Setting mismatch; cannot display memory trace
In Toolbar, Logged, Transient
To minimize distortion on higher level signals, please add external attenuation
In Toolbar, Not Logged, Persistent
To Next Page
Loading...
