Anritsu LMR Master S412E - Page 52

4-2 :CALCulate Subsystem Spectrum Analyzer Commands
4-10 PN: 10580-00319 Rev. N S412E PM
:CALCulate:LIMit:UPPer:POINt?
Title: Number of Upper Limit Points
Description: Returns the number of points currently in the upper limit line.
Default Value: 2
Related Command: :CALCulate:LIMit:POINt?
:CALCulate:LIMit:UPPer[:STATe] OFF|ON|0|1
:CALCulate:LIMit:UPPer[:STATe]?
Title: Upper Limit State
Description: Turns the upper limit line ON or OFF. It is a combination of the
commands :CALCulate:LIMit:TYPe 0 and :CALCulate:LIMit:STATe
ON|OFF. The query version of the command returns a 1 if the upper
limit line is ON and returns a 0 if OFF.
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on upper limit:
:CALCulate:LIMit:UPPer ON
:CALCulate:LIMit:UPPer 1
:CALCulate:LIMit:UPPer:STATe ON
To turn off upper limit:
:CALCulate:LIMit:UPPer OFF
:CALCulate:LIMit:UPPer 0
:CALCulate:LIMit:UPPer:STATe 0
Related Command: :CALCulate:LIMit[:STATe]
Front Panel Access: Shift-6 (Limit), On/Off