Anritsu MP8931A - Page 108

Section 5 Remote Control
5-28
System data-related messages are listed in Table 5.4.4-8.
Table 5.4.4-8 System data-related message list
Function Message Remarks
1 GPIB
Command ---
n: GPIB address
0 to 30
Query GPIB?
Response GPIB n
2 RS-232C
Command ---
n1: Baud rate
1200: 1.2 kbps
2400: 2.4 kbps
4800: 4.8 kbps
9600: 9.6 kbps
19200: 19.2 kbps
38400: 38.4 kbps
57600: 57.6 kbps
115200: 115.2 kbps
n2: Parity bit
0: None
1: Odd (odd number)
2: Even (even number)
Query RS232C?
Response
RS232C
n1, n2
3 Display
Command
DISPLAY
n1, n2
n1: Auto Off control
0: None
1: 1 min.
5: 5 min.
10: 10 min.
20: 20 min.
30: 30 min.
40: 40 min.
50: 50 min.
60: 60 min.
n2: Brightness
25: 25%
50: 50%
75: 75%
100: 100%
Query DISPLAY?
Response
DISPLAY
n1, n2
4 Version
Command ---
n1: Device version
n2: Boot program ver-
sion
n3: Application pro-
gram version
n4: FPGA program
version
Query VERSION?
Response
VERSION
n1, n2, n3, n4