Anritsu MP8931A - Display During Startup

Section 3 Screen Display
3-4
3.3 Display during Startup
When turning the MP8931A on, the startup screen shown below appears
and the self-test is executed.
If an error screen appears, the MP8931A may be faulty. Contact Anritsu
Corporation or one of our dealers.
Self-test error display and description are shown in Table 3.3-1.
Display activated
Startu
p
com
p
leted
To measurement screen
Power ON
Self-test error
To self-test error screen
Table 3.3-1 Self-test error display
Display Description
Boot Program Error Boot program error
Application Program Error Application program error
FPGA Program Error FPGA program error
FPGA Configuration Error FPGA configuration error
Parameter Error Push Enter Key Parameter error