EasyManua.ls Logo

Anritsu MP8931A - Mounting Units in Rack; Stacking Units

Anritsu MP8931A
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 2 Before Use
2-4
CAUTION
Avoid use or storage in locations, such as the following,
since it may cause failure.
In direct sunlight for extended periods
Outdoors
In excessively dusty locations
In liquids, such as water, oil, organic solvents, and
medical fluids, or places where these liquids may
adhere
In salty air or where chemically active gases (SO
2
, H
2
S,
Cl
2
, NH
3
, NO
2
, or HCl, etc.) are present
Where toppling over may occur
Where static electric charges or high electromagnetic
fields are present
Where abnormal power voltages (high or low) occur
In the presence of lubricating oil mists
Where condensation occurs
In places at an altitude of more than 2,000 m
In the presence of frequent vibration or mechanical
shock, such as in cars, ships, or airplanes
2.1.3 Stacking units
When stacking two units on top of each other, ensure that the feet of the
top unit are locked into the four adjusters on the top panel of the bottom
unit. Secure the two units together with a strong strap to prevent them
toppling over.
2.1.4 Mounting units in rack
An optional rack mount kit is required to mount units in a rack. For
details on rack mounting, refer to the instructions supplied with the rack
mount kit.

Table of Contents

Related product manuals