Anritsu MP8931A - GPIB Address Setting (GPIB Address); Initialization (Initialize)

4.1 Basic System Settings
4-3
4.1.1 Initialization (Initialize)
Initializes parameters.
Select “Initialize” on the system menu screen to execute it.
Refer to Appendix B “Initial Value List” on items to be initialized.
Initialize?
Push Enter Key
Press [Enter]
Initializing
Initialization completed
To system menu display
Completed
<Procedure>
1. Select “Initialize” by using the
∧
and
∨
keys on the System*
setting screen.
2. Press [Enter] or
>
to display the confirmation screen for Initial-
ize.
3. Press [Enter] to execute initialization.
4.1.2 GPIB address setting (GPIB Address)
Set GPIB address.
Select “GPIB Address” on the system menu screen to perform the setting.
GPIB Address
15
30
:
00
<Procedure>
1. Select “GPIB Address” by using the
∧
and
∨
keys on the
System* setting screen.
2. Press [Enter] or
>
to display the GPIB Address setting items.
3. Select GPIB address by using the
∧
and
∨
keys and press
[Enter] to finalize the setting.