Anritsu MP8931A - GPIB Cable Connection; Peripheral Equipment Connection; RS-232 C Cable Connection

Section 2 Before Use
2-12
2.4 Peripheral Equipment Connection
Connection between the MP8931A and peripheral equipment is described
below. Be sure to perform connection when power is off.
Do not input signals exceeding the rating value when peripheral
equipment is connected. Doing so may damage the inside of the
MP8931A.
2.4.1 RS-232C cable connection
The MP8931A can be controlled from remote via RS-232C (D-sub 9 pins).
Refer to Section 5 “Remote Control” for details.
2.4.2 GPIB cable connection
The MP8931A can be controlled from remote via GPIB.
Refer to Section 5 “Remote Control” for details.