Section 2 Before Use
2-2
2.1 Installing
Install MP8931A after you have taken it from a package box and have
checked the packed items. This section describes how to install it and
precautions before use.
2.1.1 Carrying unit
When carrying the MP8931A, hold both the right and left grips to keep
the unit level.
CAUTION
• Never carry the unit while the power is on. This may
damage the internal circuits and result in fire, electric
shock and/or failure.
• Carry the MP8931A by holding both grips to keep the
unit level. Carrying by holding only one grip puts
excess strain on internal precision components and
may result in damage.
2.1.2 Installing unit
Install the MP8931A horizontally in a stable place at an ambient
temperature of 0 to 50°C. Install where the cooling vents on rear panel
are at least 10 cm from walls, peripherals, or other obstructions so as not
to block the air flow through the vents.
CAUTION
Never block the MP8931A internal ventilation, otherwise
the internal temperature will rise, causing fire. Avoid the
following uses:
• In an upright position (on side).
• With the unit covered.
• With the fan or vents blocked by dust.
To Next Page
Loading...
